HYPRO metsamasinad

 The fastest and most effective tractor processors on the market. A range of machines designed to appeal equally to contractors as to self-employed forest owners. HYPRO machines combine kindness to the nature and environment with high capacity and reliability.

See below for a brief description of each model. From here, read more information on the specific model or models that suit just your needs.

LINK

HYPRO 300

 

 

   

   

HYPRO 300 is a rational, quick, three point carried thinning processor which completes its tasks fast despite its small composition and light weight (700 kg). HYPRO 300 has its own hydraulic system where the pump is mounted directly on the tractor. The machine has a load sensing valve which provides a smooth handling experience and flow control possibilities without using throttle functions. The machine also have manually height adjustable support legs.

Hypro 300 is now also equipped with a feed roller engine in the bottom feed roller. The machine feeds with three feed rollers which provides considerably increased feeding power.

This machine does an excellent job with delimbing and cutting dimensions up to 30 cm. The processor is fitted with a highly powerful and fast cutting saw which cuts so quickly that the log does not have time to drop before the chain has passed through the stem.

It has an integrated hydraulically driven winch for loading which is done via a radio controller. When stopped the winch is locked in place. The winch can also be maneuvered with hand lever on the operating valve. Through HYPRO 300's construction trees are carried automatically to its designated position by the winch.

The machines control table is placed in a comfortable working height and has easily maneuverable levers, where it also is possible to adjust the speed in both directions individually on all functions. The measuring system is optimally placed for a comfortable using experience.

This machine is a good investment, giving you high quality for a low price. It has greater engine efficiency because of its own hydraulic system, which in the long run saves you money. The gearbox of the hydraulic system in the machine provides decreased engine RPM, which also causes reduced consumption of diesel and thereby provides an improved overall cost.

VIDEO

Technical data

Weight incl. oil

c:a 700 kg

Feed rate:

>3 m/sec

Tilt angle:

40°

Slew:

45°

Min. tractor output:

50 hp

Min. diameter:

3 cm

Max. diameter:

30 cm

Winch traction force:

1.5 tons

Winch rope length:

35 m

Hydraulic pressure:

210 bar

Hydraulic flow:

90 l

Oil capacity:

90 l

Length:

1.65 m

Width:

1.60 m

 

HYPRO 450XL


 


450 XL has high and low speed, which allows very high feeding rate, 5 m/sec. This is an advantage for first and second thinning.

The 450 XL has a high feeding force and raw power for processing in heavier forest. The machine is available in a lightweight design with a separate hydraulic system, with the pump unit and tank mounted on the tractor. There is no drive shaft between tractor and machine, only hoses with quick-release couplings. These ensure quick, easy connection and disconnection.

As standard, the 450 XL model has a double joint, a feature which brings many benefits during processing, as well as for transport and transfer. In this position, with or without feeder crane, the entire machine is always narrower than the tractor. The outstanding hydraulic winch on the machine, which has both infeed- and outfeed-function and immediate braking when stopped, is always operated with professional digital radio equipment.

The HYPRO 450 XL processor has an opening diameter of 45 cm. Versatile and powerful, simple and easy to operate. The perfect all-round machine from first thinning to lighter final felling. All our machines have a double joint as standard. The effect is that cut timber always falls away from the tractor, so there is no timber on the skid road. Because of the oscillatory motion of the joint there is a remarkable scope for sorting the timber.

HYPRO Telescopic Crane
Tailor-made for crane makes working in the area close to the machine easier and more efficient. The crane works regardless of the position of the head. Spreading branch wood is simple, thanks to the slew angle and reach of the crane.

VIDEO

Technical data

Weight incl. hydr. oil

1130 / 1150 kg

Length max:

1.9 m

Length min:

1.5 m

Width when folded away:

1.6 m

Feed rate:

>3.5 m/sec / >5 m/sec

Tilt angle:

60°

Slew:

140°

Min. tractor output:

65 hp

Max diameter:

45 cm

Max delimbing diameter:

40 cm

Min. diameter:

5 cm

Winch traction force:

2 tons

Winch rope length:

50 m

Hydraulic system, load-sensing:

54 cc

Hydraulic pressure:

230 bar

Hydraulic flow, recommended:

85–100 l/min

Tank capacity:

100 l

PTO speed:

400–500 r/min

 

 

Crane specification

Lengths:

4 m / 6 m

Weights:

180 kg / 300 kg

Tractive force:

1500 kg

Lifting force at 2 m:

1200 kg

Grapple diameter max:

45 cm

 

HYPRO 755HB



The wheel carried 755 only adds 200 kg to the tractor hitch. This makes the use of lighter tractors (min. effect 70 hp) an option.

It is quick and limber with articulated steering, hydraulic stabilizer for ideal stability. It is a fully equipped machine with built in hydraulic system, and a wide angles axle for PTO. Pump and tank are both mounted on the machine.

The machine is operated with EHC Canbussystem with mini joysticks from the tractor cabin. Length and diameter measurements are standard on all 755 models.

The new 0,5 meter longer crane pillar provides increased range and enables the grapple to reach the centre of the processor table. This also provides the possibility to cut and drop trees in the centre of the processor table when using a felling grapple without having to make any repeating grabs on the tree with the grapple to place it correctly.

The machine can be delivered with either rubber- or steel feeder wheels.

The HYPRO tractor processor range
A range of machines designed to appeal equally to contractors and to self-employed forest owners. It goes without saying that HYPRO machines combine kindness to the environment with high capacity and reliability.

VIDEO

Technical data

Weight incl. hydr. oil

2350 kg

Width when folded away:

2.3 m

Ground clearance:

50 cm

Length:

3.6 m

Hydraulic steering:

Yes

Cylinders for steering:

2 pcs

Steering ability:

+/-25°

Feed rate:

>3.5 m/sec

Tilt angle:

65°

Slew:

280°

Crane length:

7.5 m

Crane slewing radius:

360°

Min. tractor output:

70 hp

Min. diameter:

5 cm

Max. delimbing diameter:

40 cm

Max. diameter:

45 cm

Winch traction force:

2 tons

Winch rope length:

50 m

Hydraulic system, variable, load-sensing:

74 cc

Hydraulic flow:

max 150 l/min

Hydraulic pressure:

250 bar

Tank capacity:

150 l

PTO speed:

400 – 540 r/min

 

HYPRO 755



The HYPRO 755 is a generously equipped tractorprocessor with its own crane, a reach of seven metres and a head, both with a working radius of 280 degrees, allowing felling on both sides. The HYPRO 755 has its own hydraulic system with pump and tank for mounting on the front of the tractor.

The hydraulic system is loadsensing and variable, giving speed, smoothness and strength. The HYPRO 755 is also available for fitting to tractors with a built-in variable hydraulic system with the necessary flow and pressure. The machine is operated by twolever electrohydraulic control (EHC). Simply by pressing a button you can choose between crane and processor. Both can be operated with the same levers. The HYPRO 755 is suitable for thinning operations and for final felling.

A remarkable 280° slewing radius and lateral displacement provide ample adjustment to suit the direction of fall of the tree and allow distances of up to 3.3 metres between timber stacks.

The machine has a radiocontrolled winch which can winch in from both sides. The design of the crane, with a tilting pedestal, gives a low centre of gravity at full reach, as well as compactness when folded. The HYPRO 755 is available with hydraulic struts as an option. If you have a tractor with a reversible driving position, a high level of comfort and a dual controls, fit it with a multi feature HYPRO 755 processor and you’ll have a fast, efficient and highly competitive harvesting machine.

VIDEO

Technical data

Weight incl. hydr. oil

1400 kg

Width when folded away:

2 m

Feed rate:

>3.5 m/sec

Tilt angle:

65°

Slew:

280°

Crane length:

7 m

Crane slewing radius:

280°

Min. tractor output:

80 hp

Min. diameter:

5 cm

Max delimbing diameter:

40 cm

Max diameter:

45 cm

Winch traction force:

2 tons

Winch rope length:

50 m

Hydraulic system, variable, load-sensing:

74 cc

Hydraulic flow, recommended:

max 150 l/min

Hydraulic pressure:

250 bar

Tank capacity:

130 l

PTO speed:

1500–2000 r/min

 

HYPRO HV14 Forwarder Trailer

The demand for a really steady trailer, a forwarder trailer, was met by Hypro in 2003. At that time, demands and requirements came from many of our export markets, but also from customers in Sweden who wanted a trailer of high quality and uncompromising stability.

Hypro HV14 Forwarder Trailer was ready in the late autumn of 2003 and was thoroughly tested under various tough working conditions. After the test period, it was clear that the trailer complied with the highest standards and that it had proven exceptional in many respects.

The trailer has a very sturdy frame structure and big wheels that give high ground clearance and low ground pressure – something that gives a competitive edge when it comes to performance.

The trailer has a double frame construction thanks to which it is very stable during crane work. The trailer does not need any support leg, which saves work time and reduces the total weight. As far as operation is concerned, customers can choose between robson drive or planetary gear. The advantage of robson drive is that it allows the use of protection against skidding (chain) on the driving wheels. It is easy to disconnect the drive during long distance driving. The trailer has a bogie with 22-degree oscillate ability for good manoeuvre capacity under tough terrain conditions.

Just as ordinary forwarders, the trailer is equipped with fixed bunks but is also available with loose, movable bunks. The trailer has frame steering with double steering cylinders which are well protected. The loading capacity of the trailer is 14 tonnes and its weight is approx. 3 tonnes.

The crane we use comes from Sweden’s leading crane manufacturer, Cranab, a name recognised for quality all over the world. The equipment is controlled with the help of a Can-bus system with mini joysticks which is easy to install in the cabin. The Can-bus system makes it very easy to electronically adjust the maximum and minimum value of each movement. There are nine different programmable presets, each of which has its own steering curve. The mini joystick system with Can-bus steering gives the highest possible driving performance.

We are pleased that there is an increasing interest for large and sturdy quality trailers, whose construction is carefully designed to fit the work conditions forest trailers encounter all over the world. Hypro HV14 Forwarder Trailer complies with these requirements precisely.

VIDEO

Technical data

Loading capacity:

14 tons

Loading area:

3.1 m²

Length:

5.50 m / 6.25 m

Width:

2.38 m

Length of loading area:

3.80 m / 4.55 m

Number of bunks, standard:

3

Additional bunks, incl. lengthening:

1

Wheels with strengthened rim:

500 / 60x22.5

Hydraulic disc brakes:

2

Hydraulic wheel motor running:

2

Cylinders for beam steering:

2

Steering ability:

+/-48°

Ground clearance:

70 cm

Weight:

2500 kg / 2800 kg

 

HYPRO FG45 Felling Grapple/Energy Felling Grapple

   


HYPRO Felling grapple is very well suited for handling anything from standing trees to fallen logs. The felling grapple can be mounted on all cranes equipped with rotator.

HYPRO FG45 is also available as energy-wood felling grapple, which is equipped with a special sword to make it possible to cut both small shrubberies and all the way up to 35 cm thick trees.

HYPRO FG45 automatically tilts the grapple up to felling position when the grapple claws reach maximum open position. If one wishes to lower the grapple back to horizontal position, one does only need to activate the cutting function and the grapple falls back to horizontal position instantly.

The valve block of the crane needs to be supplemented with an extra valve for the activation of the saw motor. This extra valve must be a motor slide model which is open to the tank line in neutral position.

The flexibility of the swift hydraulic spine of the felling grapple makes it possible to reach tree trunks in the correct felling direction. This also delivers a very rational an easily maneuvered felling experience.

Furthermore, the light weight of the felling grapple makes it possible to use the crane to its full extent without throwing the trailer off balance.

VIDEO

Technical data

Cutting diameter max:

45 cm

Tilt angle:

100°

Total weight:

140 kg

Saw hydraulic motor:

5 cm³/rev

Hydraulic pressure max:

250 bar

Oil flow min:

50 l/min

Oil flow max:

80 l/min

BigHanna
Hotrot
Compost and Waste
Duratech
Menart
MacFab
EbviCont
Yentrac
EYS
Arjes
HYPRO
© 2017 Profile Grupp